WLDZ-100C Digital Intelligent Control Smart Control New Multi-function, Dynamic Simulation Indication

Description

Digital Intelligent Control New Multi-function, Dynamic Simulation Indication.It integrates multiple functions such as primary circuit simulation diagram, circuit breaker position, switch status, grounding switch position, spring energy storage status, high-voltage electrification indication, locking and temperature and humidity control, phase verification, temperature and humidity digital display, etc.

This series of products is developed and developed according to the requirements of the “Five Prevention” in the national power industry. It is mainly suitable for the electrification, switch switch position indication, and safety locking devices (equipment) of various high-voltage electrical control cabinets in 2KV-35KV/50Hz indoor environments. It is a new type of automatic equipment with multi-function and Dynamic simulation indication. It integrates multiple functions such as primary circuit simulation diagram, circuit breaker position, switch status, grounding switch position, spring energy storage status, high-voltage electrification indication, locking and temperature and humidity control, phase verification, temperature and humidity digital display, etc. The device adopts embedded mode, which is fast and convenient to install; Users only need to provide the corresponding system scheme diagram and functional requirements once when selecting.

Main technical indicators

1. Working power supply: AC/DC110~260V, frequency 50/60Hz.

2. Usage environment: Working environment temperature -25 ℃~70 ℃, relative humidity ≤ 90%, altitude ≤ 3000m.

3. Power consumption ≤ 10W.

4. Forced locking life ≥ 10000 times.

6. Dielectric strength: greater than AC2000V between the shell and the terminal.

7. Insulation performance: greater than 100M Ω between the shell and the terminal.

8. Boundary dimension: 239mm (width) × 185 mm high × 85mm deep.

9. Opening size: 220 mm (width) × 165 mm high.

※ Introduction to Main Functions

1. Analog indication section

A. Circuit breaker status indication:

When closing, the closing contact is closed, and the red vertical simulation bar lights up.

When opening, the opening contact is closed, and the green tilt simulation bar lights up.

Circuit breaker working position indication:
B. Handcart status indication:

The working position contact of the handcart is closed, and the red vertical simulation bar is on.

The handcart experimental position contact is closed, and the green horizontal simulation bar is on.

C. Spring energy storage indication:

When the contact is closed, the red energy storage indicator light illuminates, indicating that the energy has been stored.

When the contact is disconnected, the red energy storage indicator light goes out, indicating that there is no energy storage.

D. Grounding switch indication:

When the contact is closed, the red vertical analog indicator bar lights up, indicating that the grounding switch is closed.

When the contact is disconnected, the green tilt analog indicator bar lights up, indicating that the grounding knife is disconnected.

---

If you need a quote or more information about this product, please send us a message and we will get back to you within 1 working day.

Please select the method below:

Message Form
Mobile/Whatsapp: +8613396988128
Linkedin