New Universal Accessories For Low Voltage Switchgear Drawer Hand Pull 8E/2 Unit Drawer Switchboard DLC2.1

New Universal Accessories For Low Voltage Switchgear Drawer Hand Pull 8E/2 Unit Drawer Switchboard DLC2.1插图2

The Hand Pull 8E/2 Unit Drawer offers flexibility and reliability for your low voltage switchgear drawer switchboard DLC2.1.

Category: Switchgear Accessories Tag: low voltage Switchgear

Description

Description

The Hand Pull 8E/2 Unit Drawer is a versatile accessory designed for low voltage switchgear drawer switchboard DLC2.1. It offers a range of features and functions for convenient and reliable operation:

Product Information:

Product Name: Hand Pull 8E/2 Unit Drawer
Product Type: 8E/2 Drawer
Drawer Current Options: 125A, Secondary 16 Wire, 24 Wire, 32 Wire
Drawer Height: H=200
Handle Height: H=75

Introduction to Function and Operation:

Simple Operation: This mechanism’s drawer is operated by hand pulling and pushing, providing a user-friendly and reliable locking mechanism. It comes with a standard drawer height of H=200.
Built-in Functions: The mechanism incorporates essential functions, including a three-position display, locking, and interlocking. The handle height is set to H=75.
Rear Outlet Structure: The drawer features a rear outlet structure and offers various drawer current options, including 125A and secondary configurations of 16 wire, 24 wire, and 32 wire.
Convenient Stroke: The stroke from the test position to the connection position is 24mm. The test position is for primary disconnection and secondary connection, while the connection location is for primary and secondary connections.
Transfer Switches: The mechanism provides one set of one open and one close transfer switch in both the test and connection positions. This is an improvement over conventional mechanisms, which only provide one set of one open and one close switch at the test position.
Position Indication: A rotating arrow indicates the corresponding position area on the drawer, simplifying operation.
User-Friendly Locking: The drawer can be pushed to the connection position by pressing and holding the unlock button on the left handle. When the handle is closed, the mechanism lock rod secures the positioning block on the partition board of the drawer’s bottom plate, locking the drawer in place. The unlock button is also secured to prevent unintentional movement. To unlock the drawer, open the handle and press the unlock button for easy removal.
Material Options: The 8E/2 drawer side panel is typically made of metal. If you require a plastic side panel, please specify this during your order.